Super Cell Fender / Cell Fender.
MAX is a trusted supplier for the world’s most commonly used fender type – super cell fenders. Like cone fenders, supercell’s large circular base provides great stability and possesses one of the highest energy absorption to weight ratio. Low tilt compression performance change and good resistance against shear force makes it a first choice for many wharfs.
Due to its popularity, we offer a wide range of cell fenders from max. diameter (∅D2) of 650mm to 3350mm, as well as height (H) of 400mm up to 3000mm. Besides, different sizes & performance can be custom manufactured according to customer requirement.
Installation with Frontal Frame
Like the other fenders MAX Groups supply, the frontal frame can be either UHMW-PE panels or steel made frames. These panels are mainly used to reduce the pressure acted upon ship panel surface and friction force. It helps keep the structure performing at a high level throughout its useful life.
Features of MAX Super Cell Fender
- High absorption energy capacity per weight unit
- Low Reaction Force
- High Shear Force Resistance
- Highly Effective, making it cost-effective
Specifications:
Custom sizes are available according to customer’s requirement
Performance Data Table at Max. Compression 55%
Performance tolerance ±10%
Curve data based on SC1000H
Single Cell per Panel type:
Two Cells per Panel (Vertical) type:
Two Cells per Panel Horizontal type:
Two Cells per Panel (2×1) Horizontal type:
Pre-built-in Accessories
- Bolt made of Q235 hot-dip galvanised material /1Cr13(2Cr13)1Cr18Ni9Ti/SUS304/SUS316
- Washer made of Q235 hot-dip galvanised material, 1Cr18Ni9Ti
- Pre-built-in nut made of Q235 hot-dip galvanised 1Cr18Ni9Ti/SUS304/SUS316
- Foot rod: Q235
- Foot board: Q235
Pre-built-in U-Ring
Rubber Hose